VEYRA

Dimmable Rustic Tree Branch Chandelier

In Stock

$5,649.95

$9,999.99

Code SPRING20 for 20% OffSpring Lighting Event Ends This Week

Size:

59.06” ( 150 cm )

Chandelier Size Guide - How to Choose the Right Chandelier for Your Space

We offer a wide range of chandeliers varying in size, finish, and style. Choosing the right size is not always straightforward — a fixture that's too small gets lost in the room, while one that's too large overwhelms the space. This guide gives you the exact formulas interior designers use to get it right every time.

1. Chandelier diameter — the room size formula

The most widely used rule in interior design: add your room's length and width together in feet. The result in inches is a reliable starting diameter for your chandelier.

The room size formula

Room length (ft) + Room width (ft) = Chandelier diameter (inches)

Example: A 16ft × 12ft room → 16 + 12 = 28 → aim for a chandelier approximately 28 inches in diameter

Diagram showing chandelier diameter formula: room length plus width in feet equals diameter in inches

For rectangular rooms this works for the longest span. For square rooms the formula applies directly. If the result feels too large, go 10–15% smaller — this is a starting point, not a fixed rule.

2. Chandelier height — the ceiling formula

Fixture height (from canopy to lowest point) should scale with ceiling height. This applies to pendant-style chandeliers, not flush-mount ceiling lights.

The ceiling height formula

Ceiling height (ft) × 2.5 = Fixture height (inches)

Example: 10ft ceiling → 10 × 2.5 = 25 inches of fixture height | For ceilings 12ft+, use ×3 instead

Diagram showing chandelier height formula: ceiling height in feet times 2.5 equals fixture height in inches

3. Hanging height — clearance rules

Hanging height is the distance from the floor (or tabletop) to the bottom of the fixture — separate from the fixture height itself.

Living rooms & bedrooms

7.5 ft minimum

Floor to fixture bottom. 7ft is the absolute minimum — always err higher in walkable spaces.

Dining tables

30–36 inches

Tabletop to fixture bottom. 32 inches is the sweet spot for most dining rooms.

Kitchen islands

30–36 inches

Counter surface to fixture bottom. Go slightly higher if bar stools are tall.

Foyers & entryways

7.5 ft minimum

From finished floor. High-ceilinged foyers benefit from a dramatic drop length.

Diagram showing minimum chandelier hanging height clearance of 7.5 feet above the floor

4. Dining room & kitchen islands

Size the chandelier based on the furniture itself — not just the room. The chandelier width or diameter should be between half and two-thirds of the table width.

The dining table formula

Chandelier width = ½ to ⅔ of table width | Chandelier length = ½ to ⅔ of table length

Example: A 32″ × 66″ table → round chandelier 16″–21″ diameter, or rectangular 16″–21″ wide × 33″–44″ long

Diagram showing correct chandelier proportions above a dining table

Quick rule: The chandelier should be at least 12 inches narrower than the table on each side. A 72″ dining table → chandelier width of 48″–60″. For round tables, the chandelier diameter should be roughly half the table diameter.

For very long tables (over 72 inches), a linear chandelier distributes light evenly and mirrors the table geometry.

5. Staircases & two-storey foyers

Staircase chandeliers are seen from two levels simultaneously, so both perspectives matter when choosing size and hanging height.

From the ground floor

7.5 ft clearance

From the lowest step landing to the bottom of the fixture.

From the upper floor

Eye-level at top

Hang so the chandelier top sits near second-floor eye level — creates a focal point from both levels.

Fixture height rule

2.5–3″ per ft

Allow 2.5–3 inches of chandelier height per foot of ceiling height in double-height spaces.

Diagram showing chandelier placement in a two-storey staircase foyer

Upper-floor reference: Hang the chandelier slightly below the top of the staircase so the top sits at eye level from the second floor.
Architectural centring: Centre independently on a skylight or arched window above the door for best visual impact from outside.

Tip: Always order more cord than you think you need — it's easy to shorten during installation, impossible to lengthen after. All Zenduce chandeliers include adjustable suspension wire.

6. Long hallways

For hallways, chandelier size is determined by width rather than overall room area.

The hallway formula

Hallway width (ft) × 2.5 = Chandelier diameter (inches)

Example: An 8ft wide hallway → 8 × 2.5 = 20 inch chandelier diameter

Diagram showing chandelier spacing and sizing in a long hallway

For multiple chandeliers in a long hallway: centre each fixture across the width, space them 8–10 feet apart, and maintain at least 7.5 feet of floor clearance throughout.

7. Quick reference table

A summary of all sizing rules for quick reference when specifying a project.

Space	Diameter / width	Fixture height	Hanging height
Living room (12×14ft)	~26 inches	25–30 inches	7.5 ft from floor
Dining room (over table)	½–⅔ of table width	Scale to ceiling	30–36″ above tabletop
Kitchen island	½–⅔ of island length	Scale to ceiling	30–36″ above counter
Bedroom (12×14ft)	~26 inches	Match ceiling height	7 ft minimum from floor
Foyer / entryway	Room formula	2.5–3″ per ft of ceiling	7.5 ft from floor
Staircase	Scale to volume	2.5–3″ per ft of ceiling	7.5 ft from lowest step
Long hallway	Width × 2.5 = diameter	Scale to ceiling	7.5 ft from floor

Need help specifying for your project?

Our team works with interior designers and architects on lighting specifications for residential and commercial projects. Share your ceiling height, room dimensions, and design style and we'll recommend the right fixture.

Contact our team →Shop chandeliers →Trade program (30% off) →

Color:

Copper

Emitting Color:

Warm White 2700K

Variant

Quantity:

Why Choose ZENDUCE?

What is the difference between ZENDUCE and other lighting & Home Decor Brands Online? We prioritise quality, communication & customer satisfaction over profits.

Delivery & Returns

Shipping

We ship worldwide to 120+ countries. If you're on our website, we ship to your country. This fixture is currently in stock and ready to ship. Our standard processing time is 2-5 days. Estimated delivery timelines are mentioned just above the Add to Cart button. Please note these are estimated timelines and not guaranteed. For more information view our Shipping Policy.

Returns

Your satisfaction is our number one priority, that is why we are proud to offer 30 days money back guarantee on all of our products. Customised and open box products are not refundable. For more information on view our Refund Policy

If you need assistance, please reach out to us using chat or at support@zenduce.com and we will be happy to help!

Customisation Service

Our in-house technicians can customize any order!

Popular Changes:

Hanging length
Material color or paint
Emitting color
Dimmable add-on
Add or reduce size/dimension
Redesign the entire lighting fixture to your suggestion

Speak with an expert on live chat or call us now from 9AM EST to 6PM EST. Alternatively, leave us an email at support@zenduce.com

MONEY BACK GUARANTEE

Hassle free returns, damage compensation and exchanges within 30 days of receipt

CUSTOMISATION

Just like your favorite coffee, our in-house technicians can customize your order across hanging length, size and finish. Just contact us.

DIRECT FROM PRODUCERS

Our process eliminates middlemen to source high quality products at a fair price

US BASED CUSTOMER SERVICE

Responsive & Personalised Service from experts